Hi-Cyclic® Direct Solenoid Operated Directional Control Valves
2,000 PSI for 1/8", 1/4", 3/8" and 1/2" models
3,000 PSI for 7/16-20 or 9/16-18 SAE models

Hi-Cyclic® is a directional control valve line that has become synonymous with operating dependability over many years of service. One reason for such an association to quality is our solid brass body that serves as a strong foundation for durability, allowing our valves to stand up to even the most severe applications. A second reason for them being so rugged is our sleeveless spool-to-body design. Internal restrictions are kept to a minimum, resulting in a very efficient high flow valve. Each spool is individually matched to a body, so Hi-Cyclic® valves function with a precision fit that reduces internal leakage to a minimum. We also use a simple, basic design principle -- we keep moving parts and wear points to a minimum.

The key to the product's versatility is in its modular component design. We use a few basic body styles that can be joined with a number of spool, operator and mounting options to create a magnitude of combinations. Because of our non-ferrous construction, we can handle air or hydraulic oils with pressures from 30" Hg vacuum to 250 PSI in air service, and up to 3,000 PSI when used in hydraulic service. Models are available in 1/4", 3/8" and 1/2" NPT as well as 7/16-20 and 9/16-18 SAE straight thread port sizes with foot or subplate mounts (Magna-Cycle® only). Hi-Cyclic® valves may be specified with almost any type of direct solenoid, direct pilot (air or hydraulic), manual or mechanical operators to meet your specific application requirements.

Hi-Cyclic® valve response characteristics are exceptional, making them ideal where rapid cycling is required. This fast action is due in part to its extremely short spool travel - only 0.217" maximum. Rapid response is also aided by its precision honed body that is individually matched to custom lapped, pressure balanced spools, giving each valve almost frictionless operation and effortless shifting.

The valve line features a compact, space saving design. With a maximum body length of only 2-1/4" and a maximum height of only 2-5/8" for foot mounted models, the product line yields an extremely compact envelope size and a low silhouette for installations with limited space.

Lexair direct solenoid operated valves feature fast reaction times due to the short stroke and spool-to-body frictionless fit discussed above. Operators are available in AC or DC voltages and come standard with non-locking manual overrides. All coils are rated for continuous duty.

Lexair Hi-Cyclic direct solenoid operated directional control valves

Applications include:

  • Hydraulically controlled machine tool applications
  • Operation of pneumatic and hydraulic double acting or single acting cylinders, rotary actuators, etc.
  • Oilfield equipment
  • Control valves for agricultural, construction or other types of on/off highway equipment
  • Any pneumatic or hydraulic circuit where positive, fast acting electrical control is needed
Body Brass Alloy 360
Seals Buna-N (See options page on Lexair web site for other seal options.)
Spool 303 Stainless Steel (See options page on Lexair web site for spool functions.)
Port Size

See options page for available port sizes.

Pilot ports are 1/4" NPT for all air pilot versions and 7/16-20 for all hydraulic pilot versions.

Temperature Range -20°F to +160°F (With Buna-N seals)
Pressure Rating

Pneumatic service - vacuum through 250 PSI

Hydraulic service - 2,000 PSI for 1/8", 1/4", 3/8" and 1/2" models; 3,000 PSI for 7/16-20 or 9/16-18 SAE models

NOTE: A minimum filtration rating of 10 microns is recommended for pneumatic or hydraulic service


Pneumatic 1/4" up to 1.00 Cv, 3/8" and 1/2" up to 1.13 Cv

Hydraulic up to 16 GPM

Voltages and Electrical Characteristic

See solenoid options charts on Lexair web site.

Available in: Alabama, Arizona, Arkansas, N.W. Florida, S. Idaho, Kansas, Louisiana, Mississippi, W. Missouri, Montana, Nevada, New Mexico, W. North Dakota, Oklahoma, W. South Dakota, Texas, Utah and Wyoming